Fuel tank accessories - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/kutusesusteem/paagid/lisatarvikud-paagid/ Tue, 17 Mar 2026 13:02:40 +0000 en-US hourly 1 https://tuunerstuudio.ee/wp-content/uploads/2024/10/462539801_1749936732446472_7806435627202146352_n.png Fuel tank accessories - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/kutusesusteem/paagid/lisatarvikud-paagid/ 32 32 Billet fuel cap to suit fuel cell Silver https://tuunerstuudio.ee/en/toode/kutusekork-kutusepaagile-hobedane/ Wed, 04 Mar 2026 16:52:44 +0000 https://tuunerstuudio.ee/?post_type=product&p=34290 This fuel cap fits most fuel cells on the market that use standard dimensions.

Gasket included.

The post Billet fuel cap to suit fuel cell Silver appeared first on TuunerStuudio.

]]> The post Billet fuel cap to suit fuel cell Silver appeared first on TuunerStuudio.

]]> Filler neck fuel cell https://tuunerstuudio.ee/en/toode/filler-neck-fuel-cell/ Wed, 04 Mar 2026 16:44:11 +0000 https://tuunerstuudio.ee/?post_type=product&p=34288 Filler neck fuel cell

OD: 59mm
Bolt hole CC: 120mm
12 bolts

The post Filler neck fuel cell appeared first on TuunerStuudio.

]]> The post Filler neck fuel cell appeared first on TuunerStuudio.

]]> Bulkhead terminal + and – https://tuunerstuudio.ee/en/toode/labiviiguterminal-ja/ Wed, 04 Mar 2026 16:26:20 +0000 https://tuunerstuudio.ee/?post_type=product&p=34285 Bulkhead terminal in stainless steel for electrical cables. This is for routing + and - to fuel pumps or other consumers located in a tank or through a bulkhead/firewall. Suitable for fuel tanks, fuel cells, catch tanks, trunks, etc.

For those who want to build their own tank, modify tanks for built-in fuel pumps, etc.

Technical data:
Length: 45mm
Diameter: 5mm
Mounting hole: 14mm dia.
Insertion into tank: 29mm
Protrusion from tank: 11mm
Bolt diameter: M5
Maximum diameter of spacers: 20mm
Gaskets: Viton and PTFE
Material: Stainless CNC-machined terminal block.
Max current: 60 Amps

The post Bulkhead terminal + and – appeared first on TuunerStuudio.

]]> The post Bulkhead terminal + and – appeared first on TuunerStuudio.

]]> Fuel level sensor https://tuunerstuudio.ee/en/toode/kutusetaseme-andur/ Wed, 04 Mar 2026 12:19:05 +0000 https://tuunerstuudio.ee/?post_type=product&p=34281 Level sensor for our fuel cell, also compatible with other fuel tanks.

Fits most aftermarket gauges / fuel gauges with 0–90 ohm. When connecting the sensor to a dash or control system, 0 ohm is the minimum, and 90 ohm is the maximum.

Technical Data:
Diameter: 69mm
Sensor body diameter: 31mm
Hole pattern CC: 53mm
Tank insertion depth: 255mm
Total length: 280mm
Protrusion from tank: 25mm
Bolt diameter: M5
Resistance full: 90 Ohm
Resistance empty: 0 Ohm

The post Fuel level sensor appeared first on TuunerStuudio.

]]> The post Fuel level sensor appeared first on TuunerStuudio.

]]> Billet fuel cap to suit fuel cell Black https://tuunerstuudio.ee/en/toode/kutusekork-kutusepaagile-must/ Wed, 04 Mar 2026 12:11:54 +0000 https://tuunerstuudio.ee/?post_type=product&p=34279 This fuel cap fits most fuel cells on the market that use standard dimensions.

Gaskets in PTFE included. This gasket is safe to use with all fuels including ethanol, methanol, diesel and gasoline.

Bolt hole CC is 120mm.

Material:
Base plate: Aluminum
Lid: Aluminum
Bolts: Galvanized steel

The post Billet fuel cap to suit fuel cell Black appeared first on TuunerStuudio.

]]> The post Billet fuel cap to suit fuel cell Black appeared first on TuunerStuudio.

]]> Hurricane Fuel tank sump (For Welding) https://tuunerstuudio.ee/en/toode/hurricane-kutusepaagi-pohjasuvend-keevitamiseks/ Tue, 03 Mar 2026 18:54:51 +0000 https://tuunerstuudio.ee/?post_type=product&p=34274 The Hurricane fuel tank sump is one of the simplest solutions for mounting external pumps to a steel fuel tank. You simply weld the sump at the bottom of the tank and use the pre-welded AN12 ORB connections to further mount the fuel system in AN hose or pipe.

The sump is TIG welded and is a good complement if, for example, you want to drive with an OEM tank but with an aftermarket hose/pump or simply want to mount the fuel supply downwards in a fuel cell/self-built tank.

The sump is shaped so that as much fuel as possible can be used and so that it has the lowest point in the tank.

Specifications:
Dimensions: 225x180x75mm
Material: Steel
Connections: 2pcs AN12 ORB with seat for O-ring
TIG Welded

The post Hurricane Fuel tank sump (For Welding) appeared first on TuunerStuudio.

]]> The post Hurricane Fuel tank sump (For Welding) appeared first on TuunerStuudio.

]]> Fuel hose (in-tank compatible) 8mm ID https://tuunerstuudio.ee/en/toode/kutusevoolik-paagisisene-uhilduv-8-mm-siselabimoot/ Sat, 28 Feb 2026 12:31:30 +0000 https://tuunerstuudio.ee/?post_type=product&p=34031 This is the only "rubber" hose that works with in-tank use, E85 or flexifuel.
8mm fuel lines are standard in most cars.

Specification:
8mm ID
In-tank hose
Can be used both with hose clamps and Push-on AN5 fittings

Sold per meter

This product is cut to order. No right of return.

The post Fuel hose (in-tank compatible) 8mm ID appeared first on TuunerStuudio.

]]> The post Fuel hose (in-tank compatible) 8mm ID appeared first on TuunerStuudio.

]]> Fuel hose PTFE (in-tank compatible) 8mm ID – 45cm https://tuunerstuudio.ee/en/toode/kutusevoolik-ptfe-paagisisene-uhilduv-8-mm-siselabimoot-45-cm/ Sat, 28 Feb 2026 12:24:13 +0000 https://tuunerstuudio.ee/?post_type=product&p=34030 This PTFE fuel hose is specifically designed for in-tank usage where you have in-tank fuel pumps.
8mm fuel lines are standard in most cars.

Specification:
ID: 8mm inside
Material: PTFE hose
Length: 45cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

The post Fuel hose PTFE (in-tank compatible) 8mm ID – 45cm appeared first on TuunerStuudio.

]]> The post Fuel hose PTFE (in-tank compatible) 8mm ID – 45cm appeared first on TuunerStuudio.

]]> Fuel hose (in-tank compatible) 10mm ID https://tuunerstuudio.ee/en/toode/kutusevoolik-paagisisene-uhilduv-10-mm-siselabimoot/ Sat, 28 Feb 2026 10:45:04 +0000 https://tuunerstuudio.ee/?post_type=product&p=34028 This is the only "rubber" hose that works with in-tank use, E85 or flexifuel.

8mm fuel lines are standard in most cars. But in some cases, there is 10mm as this hose will cover.

Specification:
10mm ID
15.2mm OD
In-tank hose
Can be used both with hose clamps and Push-on AN6 fittings

Sold per meter

This product is cut to order. No right of return.

The post Fuel hose (in-tank compatible) 10mm ID appeared first on TuunerStuudio.

]]> The post Fuel hose (in-tank compatible) 10mm ID appeared first on TuunerStuudio.

]]> Fuel hose PTFE (in-tank compatible) 10mm ID – 45cm https://tuunerstuudio.ee/en/toode/kutusevoolik-ptfe-paagisisene-uhilduv-10-mm-siselabimoot-45-cm/ Sat, 28 Feb 2026 10:41:07 +0000 https://tuunerstuudio.ee/?post_type=product&p=34026 8mm fuel lines are standard in most cars.

Specification:
ID: 10mm inside
Material: PTFE hose
Length: 45cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

The post Fuel hose PTFE (in-tank compatible) 10mm ID – 45cm appeared first on TuunerStuudio.

]]> The post Fuel hose PTFE (in-tank compatible) 10mm ID – 45cm appeared first on TuunerStuudio.

]]>