The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the S38B36 engine can be found under Downloads.

Features:
- Cable harness and sensors can be used without changes
- Inductive sensor of cylinder 6 is used as camshaft sensor
- full-sequential ignition and injection can be realised via additional plug
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW S38B36 (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW S38B36 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M60 engine can be found under Downloads.

Features:
- Cable harness and sensors can be used without changes
- full-sequential ignition and injection
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M60 (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M60 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A boot loader is loaded on the board, which makes it easy to load the desired firmware via USB.
A Tunerstudio basic setup for the M54 engine can be found under Downloads.

Features:
- DBW (drive-by-wire) with adjustable map
- Cable harness and sensors can be used without changes
- full-sequential ignition and injection
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- wideband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M54 (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M54 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M52TU engine can be found under Downloads.

Features:
- Cable harness and sensors can be used without changes
- full-sequential ignition and injection
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- wideband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M52TU (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M52TU appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M52 engine can be found under Downloads.

Features:
- Cable harness and sensors can be used without changes
- full-sequential ignition and injection (it is necessary to replace the camshaft sensor with e.g. Hella 6PU 009 121-641 from the M52TU)
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M52 (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M52 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M50B25TU engine can be found under Downloads.

Features:
- Cable harness and sensors can be used unchanged
- full-sequential ignition and injection
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M50B25TU (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M50B25TU appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M50B20TU engine can be found under Downloads.

Features:
- Cable harness and sensors can be used unchanged, except for the speed sensors
- the crankshaft sensor must be replaced by the one from the M50B25TU (e.g. HELLA 6PU 009 110-541)
- full-sequential ignition and injection (it is necessary to replace the camshaft sensor with e.g. Hella 6PU 009 121-641 from the M52TU)
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M50B20TU (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M50B20TU appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3.
A Tunerstudio basic setup for the M50 engine can be found under Downloads.

Features:
- Cable harness and sensors can be used without changes
- full-sequential ignition and injection
- adjustable knock control with TPIC8101
- integrated 3-bar boost sensor
- integrated SD card data logger with real-time clock
- input for K-type exhaust gas temperature sensor
- boost control
- CAN bus (e.g. for dashboards, displays or accessories)
- several inputs for circuit switching, launch control, etc.
- several free digital and PWM outputs
- updatable coprocessor (ESP32) for lambda, Bluetooth and CAN
- Bluetooth with adjustable PIN code
- broadband lambda controller

This product is only street-legal with special permission in most countries. Please check local laws before using on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:
- UAB BMW M50 (tested on an engine)
- SD card
- USB cable
- UAB manual

Download

The post UAB BMW M50 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100, which is also used in the Megasquirt 3.
A TunerStudio basic setup for the M44 engine can be found under Downloads.

Features:

• Cable harness and sensors can be used without modifications

• Full sequential ignition and injection

• Adjustable knock control with TPIC8101

• Integrated 3 bar boost sensor

• Integrated SD card logger with real-time clock

• Input for K-type exhaust gas temperature sensor

• Boost control

• CAN bus support (e.g. for dashboards, displays, or accessories)

• Several inputs for mode/table switching, launch control, etc.

• Several free digital and PWM outputs

• Updatable co-processor (ESP32) for lambda, Bluetooth, and CAN

• Bluetooth with adjustable PIN code

• Wideband lambda controller

This product is only street legal with special permission in most countries. Please check local laws before using it on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:

• UAB BMW M44 (tested on an engine)

• SD card

• USB cable

• UAB manual

• Download

The post UAB BMW M44 appeared first on TuunerStuudio.

The board contains a powerful Motorola 9S12XEP100, which is also used in the Megasquirt 3.
A TunerStudio basic setup for the M42 engine can be found under Downloads.

Features:

• Cable harness and sensors can be used without modifications

• Full sequential ignition and injection

• Adjustable knock control with TPIC8101

• Integrated 3 bar boost sensor

• Integrated SD card logger with real-time clock

• Input for K-type exhaust gas temperature sensor

• Boost control

• CAN bus support (e.g. for dashboards, displays, or accessories)

• Several inputs for mode/table switching, launch control, etc.

• Several free digital and PWM outputs

• Updatable co-processor (ESP32) for lambda, Bluetooth, and CAN

• Bluetooth with adjustable PIN code

• Wideband lambda controller

This product is only street legal with special permission in most countries. Please check local laws before using it on public roads.
Automatic transmissions are currently not supported.

Scope of delivery:

• UAB BMW M42 (tested on an engine)

• SD card

• USB cable

• UAB manual

• Download

The post UAB BMW M42 appeared first on TuunerStuudio.