Sobib 8HP70 N57 käigukastiga. Adapterplaat sisaldab kahekordset mustrit, et toetada mootori null- ja normaalkallakut. Kasutada OEM T5 või T6 flexplaati või täis hooratta puhul on vajalik T6 starter, kuna sellel on spetsiifiline starteri rõngas. Kasutage starterit Volvo osanumbri 9168267 järgi. Adapterplaat ja konverteradapter on valmistatud kõrgekvaliteedilisest alumiiniumist, loomuliku ja musta anodeerimisega, et pakkuda premium-kogemust.

The post Volvo whiteblock to 8HP70 N57 adapter kit appeared first on TuunerStuudio.

Adapterplaat ja konverter adapter on valmistatud kõrgekvaliteedilisest alumiiniumist ja anodeeritud mustaks ja looduslikuks, pakkudes premium-kogemust.

Adapterplaat on 23mm paksune.

Adapteril on topeltmuster, mis tähendab, et sellel on nii tavaline mootori kallutus kui ka nullmootori kallutus. Sobib kasutamiseks Volvo siduriketta osanumbriga 6842012 (integreeritud käivitusrõngaga) või 1326336 (ilma käivitusrõngata).

Komplekt sisaldab ka uusi Volvo osi, mida tuleb paigaldada koos sidurikettaga: Osanumber 1336913, suunamisliigend.

Osanumber 463088, flants.

Pöördemomendi konverter adapteril on 8 auku, seega on võimalik puurida veel 4 auku, et saada parem kinnitustugevus.

The post Volvo Redblock to 8HP70 N57 Adapter Kit appeared first on TuunerStuudio.

The post Toyota 1JZ / 2JZ to 8HP 45/50/70/75/76 N57 B58 B57 S58 adapter kit appeared first on TuunerStuudio.

Adapterplaat ja konverteri adapter on valmistatud kõrgekvaliteedilisest alumiiniumist ning looduslikult ja mustalt anodeeritud, et pakkuda premium kvaliteeti ja kogemust. Adapterplaadi paksus on 20 mm

The post Saab B2xx 8HP N57 Adapter kit appeared first on TuunerStuudio.

Fits 8HP transmission with the N57 bolt pattern and 6-bolt converter. Adapter plate and converter adapter made out of high grade aluminum and natural and black anodized for a premium feel and experience. Adapter plate thickness is 30mm. To be used with standard flexplate.
Adapter kit includes:
- MB M10x / OM60x 8HP 50/70/75/76 N57 B58 B57 S58 Adapter plate.
- Converter adapter and center guide.
- Mounting hardware such as bolts and dowels.

The post Mercedes Benz M10x / OM60x 8HP N57 appeared first on TuunerStuudio.

Adapter kit to fit a BMW 8HP gearbox to a Mazda 13B/20B engine. Fits both manual and automatic rear end. Automatic starter is required on both rear ends. If you have a manuel rear end, some grinding is required to make the starter go free. The automatic starter requires to be cut in the upper right corner to not interfere with the transmission dowel and bolt. Adapter made out of high grade aluminum and natural anodized for a premium feel and experience. Adapter plate thickness is a 76mm. Requires the Mazda Automatic Flexplate to utilize the starter ring gear. A hub is included which is mounted on top of the Mazda flexplate. Last the BMW flexplate is mounted to be able to mount the torque converter.

Includes: Adapter plate, hub, mounting hardware.

NOTE: the BMW flexplate is NOT INCLUDED

The post Mazda 13B/20B Rotary 8HP Adapter Kit 45/50/70/75 N57 B57 B58 appeared first on TuunerStuudio.

The post Honda K20/K24 to 8HP 45/50/70/75 N55 N57 B58 B57 S58 adapter kit appeared first on TuunerStuudio.

Adapter kit to fit a Dodge 8HP70 / 8HP90 Scat Pack Hellcat gearbox to a Chevy LS/LT/SB/BB engine. Fits Dodge 8HP70 and 8HP90 Gearbox. Pre 2018 and 2018+ (Scat pack) transmissions. Adapter plate and converter adapter made out of high grade aluminum and natural and black anodized for a premium feel and experience. Adapter plate thickness is 35mm. Note! Recommended to use a non-shrouded starter, otherwise you need to trim the gearbox bellhousing.

The post CHEVY LS/LT/SB/BB to DODGE 8HP70 / 8HP90 SCAT PACK HELLCAT ADAPTER KIT appeared first on TuunerStuudio.

Adapter plate and converter adapter made out of high grade aluminum and natural/black anodized for a premium feel and experience. Includes three bolt pattern on the backside of the converter adapter to support multiple chevy and converter bolt patterns. The following PCDs are: - 10.75inch (6-bolt) - 11.08inch (6-bolt) - 11.5inch (6-bolt) Adapter plate thickness is 35mm.

The post CHEVY LS/LT/SB/BB till 8HP70 BMW N63 ADAPTER KIT appeared first on TuunerStuudio.

Includes three bolt pattern on the backside of the converter adapter to support multiple chevy and converter bolt patterns.

The following PCDs are:
- 10.75inch (6-bolt) - 11.08inch (6-bolt) - 11.5inch (6-bolt) Adapter plate thickness is 35mm.

Note! Recommended to use a non-shrouded starter, otherwise you need to trim the adapter and gearbox bellhousing.

The post CHEVY LS/LT/SB/BB till 8HP 45/50/70/75/90 B48 N57 B57 B58 adapter kit appeared first on TuunerStuudio.