Made to fit the Dodge 8HP shifter, if using another CAN shifter, the connector needs to be cut and changed.
The OBD connector is there for future flash/tuning purposes.
1800mm between the shifter and the GT150 connector.
2100mm between the 8HP connector and the GT150 connector.

The post MaxxECU 8HP (GEN1) cable harness (Dodge shifter appeared first on TuunerStuudio.

Made to fit the BMW 8HP shifter with the 10-pin connector, if using another CAN shifter, the connector needs to be cut and changed.
The OBD connector is there for future flash/tuning purposes.
1800mm between the shifter and the GT150 connector.
2100mm between the 8HP connector and the GT150 connector.
NOTE: the image shows the DODGE shifter.

The post MaxxECU 8HP (GEN1) cable harness (BMW 8HP shifter) appeared first on TuunerStuudio.

Features dual transfer case patterns which means it fits both early and current design of the BMW 8HP transfer cases bolt pattern. ATC13-1 and earlier. Confirmed fitment
8HP70x N57 (1st gen)
8HP75x B57 (2nd gen)
8HP76X B57 (3rd gen)
8HP90/95x N73/N74 (2nd gen)

Adapter plates houses a high speed bearing together with a new output flange made of high strength steel SS2541, which holds a dual pattern to fit 1350 Yoke and the Supra MKIV propshaft. Features several extra holes to be able to build a suitable crossmember bracket. Everything comes assembled, installed on the transmission in less then a minute. Adapter plate made out of high quality aliminium, anodized in a natural color to increase scratch resistance and give a premium customer experience. Output flange is made in high strength steel SS2541.

The AWD to RWD conversion kits includes:

AWD to RWD conversion adapter
High speed RPM bearing
New output flange, features 1350 Yoke pattern and Supra MKIV propshaft pattern
Support bracket to be used with custom crossmember
Mounting hardware for the conversion adapter, output flange and crossmember bracket.

The post BMW 8HP AWD to RWD conversion adapter Kit – 1350/Supra yoke appeared first on TuunerStuudio.

An updated, slimmer, and lightweight design to follow the gearbox as close to the body as possible. Converts the gearbox oil outputs to two AN8 threaded outputs, thread ¾-16. Use any ORB8 fittings to whatever output your application finds suitable (AN6, AN8, AN10, etc.). This adapter has 18 mm bores, offset holes, and an M8 mounting bolt.

Comes with bolt and o-rings, high-quality AN8 adapters available separately.

The post 8HP Oil Cooler Adapter BMW N54/N55, N63 AND N73/N74 – TYPE 2 appeared first on TuunerStuudio.

Converts the gearbox oil outputs to two AN8 threaded outputs, thread ¾-16. Use any ORB8 fittings to whatever output your application finds suitable (AN6, AN8, AN10, etc.). The 8HP75 N57 has 17 mm bores, offset holes, and M6 mounting bolt.

Comes with bolt and o-rings, high-quality AN8 adapters available separately.

This version is higher than the N57 and B58, clearing the larger boulder in the transmission casing compared to the 70 N57 transmission.

The post 8HP Oil Cooler Adapter 8HP75 N57 AWD X5 X6 – TYPE 4 appeared first on TuunerStuudio.

Converts the gearbox oil outputs to two AN8 threaded outputs.
The 8HP70 N57 and 8HP50 B58 has 17 mm bores, ofset holes and M6 mounting bolt. Comes with bolt and o-rings, see transmission tech link to select the accurate OCA.

The post 8HP Oil Cooler Adapter (N57/B58 F-series) TYPE 1 appeared first on TuunerStuudio.

Converts the gearbox oil outputs to two AN8 threaded outputs, thread 3/4-16. The 8HP75 B57 has 18 mm bores, no offset holes, and M6 mounting bolt.

Comes with bolt and o-rings.

The post 8HP Oil Cooler Adapter – B57 G-series TYPE 3 appeared first on TuunerStuudio.

Delivery time: 1-2 weeks

The post 8HP GEN1 firmware flash appeared first on TuunerStuudio.

The kit includes:

• Oil pan
• Oil filter
• Gasket
• Bolts and our DomiWorks created oil plug.

The pan is 7-8mm deeper than stock and holds more oil than the OEM pan. (Oil volume to be confirmed). Integrated baffle design for improved oil volume control and flow. Mounting holes to hold the integrated oil filter in place. Beautifully cut, exposing the serrated surface, which has now become our design insignia. The serrated surface is not only a design element but also helps improve heat exchange cooling capacity. Features OEM gasket and oil filter, which can be purchased from our store or any 8HP OEM parts reseller. DomiWorks aluminum DCT/8HP oil pan plug (no integrated magnet due to its proximity to a solenoid). Features four additional mounting holes if you wish to mount a custom heat shield, air direction plates, etc. Includes all required mounting hardware. Fits all 8HP Transmissions with this type of plastic oil pan, not just for BMW, but also for Dodge and other brands. Fits 8HP45/50/70/75 Tra

The post 8HP Billet Oil Pan (8HP45/50/70/75) appeared first on TuunerStuudio.

The post 8HP / DCT AN8 to ORB-8 connector (x2) appeared first on TuunerStuudio.