Specification:
8mm ID
In-tank hose
Can be used both with hose clamps and Push-on AN5 fittings

Sold per meter

This product is cut to order. No right of return.

The post Fuel hose (in-tank compatible) 8mm ID appeared first on TuunerStuudio.

Specification:
ID: 8mm inside
Material: PTFE hose
Length: 45cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

The post Fuel hose PTFE (in-tank compatible) 8mm ID – 45cm appeared first on TuunerStuudio.

8mm fuel lines are standard in most cars. But in some cases, there is 10mm as this hose will cover.

Specification:
10mm ID
15.2mm OD
In-tank hose
Can be used both with hose clamps and Push-on AN6 fittings

Sold per meter

This product is cut to order. No right of return.

The post Fuel hose (in-tank compatible) 10mm ID appeared first on TuunerStuudio.

Specification:
ID: 10mm inside
Material: PTFE hose
Length: 45cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

The post Fuel hose PTFE (in-tank compatible) 10mm ID – 45cm appeared first on TuunerStuudio.

Specification:

ID: 10mm
Material: PTFE
Length: 45cm
Max working pressure SAE J2044: 5bar / 72psi (Use supplied hose clamp and increase working pressure to max 10bar)
Max working temperature: -40°C - +110°C

The post In-Tank 10mm PTFE hose SAE 3/8″ straight fitting appeared first on TuunerStuudio.

Specification:

ID: 10mm
Material: PTFE
Length: 45cm
Max working pressure SAE J2044: 5bar / 72psi (Use supplied hose clamp and increase working pressure to max 10bar)
Max working temperature: -40°C - +110°C

The post In-Tank 10mm PTFE hose SAE 3/8″ 90° fitting appeared first on TuunerStuudio.

Specification:

ID: 10mm
Material: PTFE
Length: 45cm
Max working pressure SAE J2044: 5bar / 72psi (Use supplied hose clamp and increase working pressure to max 10bar)
Max working temperature: -40°C - +110°C

The post In-Tank 8mm PTFE hose SAE 5/16″ straight fitting appeared first on TuunerStuudio.

This PTFE hose is mounted in the fuel tank or catch tank between the fuel pump hose connection and a SAE 3/8" quick connection.
Specification:

ID: 10mm
Material: PTFE
Length: 45cm
Max working pressure SAE J2044: 5bar / 72psi (Use supplied hose clamp and increase working pressure to max 10bar)
Max working temperature: -40°C - +110°C

The post In-Tank 8mm PTFE hose SAE 5/16″ 90° fitting appeared first on TuunerStuudio.

The hose is completely made of PTFE so it can handle all fuels available on the market without any problems. The flexible design makes the hose soft and flexible. Therefore, you can buy a longer hose than you need, so you can easily spin the hose to make it shorter when needed.

8mm fuel lines is standard in most cars.

Specification:
ID: 8mm inside
Material: PTFE hose
Length: 30cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

Hose clamps must be used and is included

The post Fuel hose PTFE (in tank compatible) 8mm ID – 30cm appeared first on TuunerStuudio.

The hose is completely made of PTFE so it can handle all fuels available on the market without any problems. The flexible design makes the hose soft and flexible. Therefore, you can buy a longer hose than you need, so you can easily spin the hose to make it shorter when needed.

Specification:
ID: 10mm inside
Material: PTFE hose
Length: 30cm
Normal working pressure: 0-7bar (0-101 psi)
Maximum pressure: 10bar (145 psi)
Working temperature: -70 - 250 degrees

Hose clamps must be used and is included

The post Fuel hose PTFE (in tank compatible) 10mm ID – 30cm appeared first on TuunerStuudio.