60° hose ends - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/an-liited/speeding-an-liited/an-liitmikud-voolikud/an-liitmikud/voolikuliitmikud-kiirvabastus-motorsport/60-voolikuliitmikud/ Sat, 21 Feb 2026 18:03:49 +0000 en-US hourly 1 https://tuunerstuudio.ee/wp-content/uploads/2024/10/462539801_1749936732446472_7806435627202146352_n.png 60° hose ends - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/an-liited/speeding-an-liited/an-liitmikud-voolikud/an-liitmikud/voolikuliitmikud-kiirvabastus-motorsport/60-voolikuliitmikud/ 32 32 AN4 60° Quick-Connect hose end https://tuunerstuudio.ee/en/toode/an4-60-quick-connect-voolikuliide/ Sat, 21 Feb 2026 18:03:49 +0000 https://tuunerstuudio.ee/?post_type=product&p=33629 Internal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.

See the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.

Male:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

Female:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

ORB (O-ring Boss):
Screws into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.

Hose fitting:
Connects to AN-hose. The opposite end connects to a Quick-Connect adapter.

The post AN4 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> The post AN4 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> AN6 60° Quick-Connect hose end https://tuunerstuudio.ee/en/toode/an6-60-quick-connect-voolikuliide/ Sat, 21 Feb 2026 17:59:52 +0000 https://tuunerstuudio.ee/?post_type=product&p=33624 Internal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.

See the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.

Male:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

Female:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

ORB (O-ring Boss):
Screws into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.

Hose fitting:
Connects to AN-hose. The opposite end connects to a Quick-Connect adapter.

 

The post AN6 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> The post AN6 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> AN8 60° Quick-Connect hose end https://tuunerstuudio.ee/en/toode/an8-60-quick-connect-voolikuliide/ Sat, 21 Feb 2026 17:11:39 +0000 https://tuunerstuudio.ee/?post_type=product&p=33619 Internal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.

See the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.

Male:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

Female:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

ORB (O-ring Boss):
Screws into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.

Hose fitting:
Connects to AN-hose. The opposite end connects to a Quick-Connect adapter.

The post AN8 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> The post AN8 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> AN10 60° Quick-Connect hose end https://tuunerstuudio.ee/en/toode/an10-60-quick-connect-voolikuliide/ Sat, 21 Feb 2026 17:06:42 +0000 https://tuunerstuudio.ee/?post_type=product&p=33614 Internal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.

See the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.

Male:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

Female:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

ORB (O-ring Boss):
Screws into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.

Hose fitting:
Connects to AN-hose. The opposite end connects to a Quick-Connect adapter.

 

The post AN10 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> The post AN10 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> AN12 60° Quick-Connect hose end https://tuunerstuudio.ee/en/toode/an12-60-quick-connect-voolikuliide/ Sat, 21 Feb 2026 16:24:31 +0000 https://tuunerstuudio.ee/?post_type=product&p=33607 Internal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.

See the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.

Male:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

Female:
Screws into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.

ORB (O-ring Boss):
Screws into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.

Hose fitting:
Connects to AN-hose. The opposite end connects to a Quick-Connect adapter.

The post AN12 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]> The post AN12 60° Quick-Connect hose end appeared first on TuunerStuudio.

]]>