Hurricane air filter DryFlow 63mm (2.5″)
Twin filter cone performance air filter for motorsport and racing where flow and power are prioritized. Most flow per cm2 filter area in the class!
Twin filtercone air filter with 8 layer without oil.
Connection: 63mm (2.5″)
Total length: 187mm
Around 800hp but completely dependent on other engine components. This filter provides the most flow / power per cm2 of filter area in its class.
Filter material that is built up in layers with a steel skeleton that gives the air filter stability to withstand surge and pressure shocks in the best possible way.
Mounted so fresh air easily reaches the filter surface. Mounted protected from the engine’s heat radiation as the intake temperature affect engine performance ina negative way. Also keep the filter protected from water. dirt and heat radiation for the best possible life span.
1. Fill a bucket with water and filter cleaner / soap
2. Dip the filter into the water and spin around
3. Pick up the filter and allow to drain and air dry
Hurricane motorsport air filter is very wear resistant but must still be handled carefully to maintain maximum power and flow.
Hurricane motorsport air filter is a product that has been tested for many years and now four models have been developed to cover the need with everything from tuned street cars to drag racing cars.
# Four layer oiled air filter 187mm short
Used mainly in motorsport up to about 1000hp for maximum flow.
# Four layer oiled air filter 280mm long
Used mainly in motorsport up to about 1500hp for maximum flow.
# Eight layer dryflow air filter 187mm short
Used both in motorsport and for tuned street cars and enthusiast cars up to about 800hp for you who want the best filtration but with a little less flow than the four layer filters.
# Eight layer dryflow air filter 280mm long
Used both in motorsport and for tuned street cars and enthusiast cars up to about 1200hp for you who want the best filtration but with a little less flow than the four layer filters.