Piduritarvikud - TuunerStuudio

Ёмкость для тормозной жидкости

karl — Sat, 07 Dec 2024 12:05:49 +0000

Резьба для крепления: 7/16"

The post Ёмкость для тормозной жидкости appeared first on TuunerStuudio.

Motul RBF660 Racing pidurivedelik

TuunerStuudio — Fri, 11 Oct 2024 12:00:11 +0000

Norm DIN/ISO: 4925

Norm SAE: J1703; J1704

Kuiv: 325°C

Märg: 205°C

Maht: 0,5L

The post Motul RBF660 Racing pidurivedelik appeared first on TuunerStuudio.

Elektrooniline vaakumpump

TuunerStuudio — Fri, 11 Oct 2024 12:00:10 +0000

Elektrooniline vaakumpump on mõeldud turbomootoritele mis tagab koguaeg pidurivõimendile ühtlase töötamise, mille tõttu ei lähe piduripedaal jäigemaks.

Pinge: 12V

The post Elektrooniline vaakumpump appeared first on TuunerStuudio.

Piduritoru liide 3/8″x24 UNF

TuunerStuudio — Fri, 11 Oct 2024 11:27:25 +0000

Pikkus: 20,5mm

Keerme mõõt tollides: 3/8 toll

Keermesamm tollides: 24UNF

The post Piduritoru liide 3/8″x24 UNF appeared first on TuunerStuudio.

Piduritoru liide 7/16″x20UNF

TuunerStuudio — Fri, 11 Oct 2024 11:27:25 +0000

Pikkus: 21.5mm

Keerme mõõt tollides: 7/16

Keermesamm tollides: 20UNF

The post Piduritoru liide 7/16″x20UNF appeared first on TuunerStuudio.

Piduritoru vasest (5m, läbimõõt 4,75mm)

TuunerStuudio — Fri, 11 Oct 2024 11:27:25 +0000

Läbmõõt: 4,75mm

Materjal: Vask

Müüakse 5m kaupa.

Kui on soov suurem kogus tellida siis palun kirjutada: sales@tuunerstuudio.ee

The post Piduritoru vasest (5m, läbimõõt 4,75mm) appeared first on TuunerStuudio.

Brake fluid reservoir

TuunerStuudio — Fri, 11 Oct 2024 10:52:41 +0000

Brake fluid reservoir.

Ideal for race cars and Hyd clutch reservoir. Size:80mm in height and 70mm across. 7/16-20UNF fitting.

This unit has has no level sensor.

The post Brake fluid reservoir appeared first on TuunerStuudio.

Motul RBF600 Racing Pidurivedelik

TuunerStuudio — Fri, 11 Oct 2024 10:52:41 +0000

Norm SAE: J1703

Nom DIN/ISO: 4925

Märg: 205°C

Kuiv: 205°C

Maht: 0,5L

The post Motul RBF600 Racing Pidurivedelik appeared first on TuunerStuudio.

SPD distribution valve

TuunerStuudio — Fri, 11 Oct 2024 10:52:25 +0000

SPD distribution valve is a new updated version where overflow / air channels have been made to minimize small air pockets remaining in the valve even after bleeding the brake system.

SPD distribution valve uses M10x1 thread on all connections s well as the bleeding screw. This valve has no problem with leakage around threads as other can have. The bleed screw is also made of stainless steel for best durability and seals even if the valve is mounted outside the passenger compartment.

Internal o-rings made of EPDM specially designed for brake fluid. These o-rings is not compatible with engine oil or other chemicals.

SPD distribution valve has a new modern design that matches other SPD products.

Installation:

A distribution valve is used in conjunction with a hydraulic handbrake, so that the foot brake and hand brake cannot affect each other and accidentally lock up the wheels.

One other benefit from using the SPD distribution valve is that the pressure from the foot brake not goes through the handbrake cylinder, which will break the handbrake cylinder internal clip.

Highly recommended when installing a hydraulic handbrake and a must for the seriously built cars.

NOTE: The handbrake cylinder should take brake fluid from the same container as the rear brake! Ask us for assembly instructions if you are unsure.

spd-systems.com

SPD performance parts

SPD Performance Parts are quality products for oil, air, water and fuel systems. Developed to meet the highest demands of motorsports. All products are carefully tested both in virtual and controlled environments, as well as on the street and race track where they will ultimately be used. SPD products are developed and tested by experienced technicians as well as racing drivers to maximize functionality and reliability. With these extensive tests, the same high function is also ensured over long periods of time.

When such extensive tests are made to ensure quality over time, the full 5-year full warranty is given on all SPD AN-fittings and up to 3 years on other SPD products. Even for those who use them in racing and the most demanding motorsports. SPD performance parts are probably the only ones having such generous guarantees on motorsport products.

The post SPD distribution valve appeared first on TuunerStuudio.