- 16degree (~70mm) pedal travel
- Generic or custom application firewall / bulkhead mounted hanging design suitable for Drive-by-wire (DBW) control.
- Redundant dual output potentiometers suitable for use with Electronic throttle bodies
- Use 6-pin Compact mating connector F 005 X11 508
- For use with ECU's controlling Electronic throttle systems

+5V sensor (2) supply
+5V sensor (1) supply
Sensor (1) GND
TPS 1 (Analog input x)
Sensor (2) GND
TPS 2 (Analog input x)

The post Bosch Electric accelerator pedal appeared first on TuunerStuudio.

Brake
The large, easy-to-modulate brake pedal allows quick transitions between throttle and clutch, along with unbeatable brake feel. Wide cylinder mounts enable full travel of the balance bar without binding – a common issue that is now completely eliminated.

Clutch
The narrower clutch pedal provides better feel at the engagement point and improved control. The increased distance to the brake pedal allows safer operation. Thanks to the uniball joint, precise and play-free motion is achieved – even under high load.

Throttle
The throttle pedal features adjustable leverage, resistance, and cable linkage for optimal feel during rev-matching, heel-toe, and driving posture – while also ensuring easy installation. The pedal is prepared for DBW (Drive-by-Wire) sensor and includes an integrated return spring system for secure and accurate return.

Master Cylinders
Master cylinders can be mounted straight or at a 45° angle in enlarged openings – offering great flexibility and customization. Threaded holes also simplify mounting to the pedal box.

Technical

CNC Construction - Fully CNC-machined from aircraft-grade aluminum.
Pedal Ratio - Ratio 7.0:1 – 7.5:1 on brake and clutch pedals for easy adjustment of leverage/brake pressure.
Large Brake Surface - Enables fast switching between throttle/clutch and provides unbeatable brake feel. ~9500mm² pedal surface area (79.5×120mm)
Adjustable Height - Adjustable height on brake and clutch pedals by 15mm (265–280mm)
Adjustable Pedal Position - Infinitely adjustable fore/aft pedal position on all pedals for optimal driving ergonomics – a key factor for fast lap times and safe control.
Narrow Clutch Pedal - Provides better engagement feel and safer clearance to brake pedal.
Adjustable Resistance - The throttle pedal also features adjustable resistance.
Sliding Surfaces - All sliding surfaces use bronze bushings or uniballs.
Shafts - All exposed shafts are made of class 12.9 high-strength steel.
Balance Bar - The balance bar is housed in a steel sleeve for extreme wear resistance.
Master Cylinder - Threaded mounting holes for master cylinders (use nuts and washers for final installation). Pre-made 90° and 45° mounting holes for master cylinders increase compatibility with various components.
Wide Cylinder Mount - Extra wide cylinder mount allows full motion of the balance bar and eliminates the risk of binding during hard braking.
Electronic Throttle (DBW) - Throttle pedal prepared for DBW (Drive-by-Wire) sensor (potentiometer for electronic throttle purchased separately).
Return Spring Throttle - Throttle pedal includes a return spring system for secure return and reliable function on throttle cable setups.
Mounting - Base plate has 7x pre-drilled mounting holes.

Contents

As shown in the pictures, excluding master brake cylinders and bolts

Aluminum base construction with reinforcements
Aluminum throttle pedal kit
Aluminum brake pedal kit
Balance bar
Aluminum clutch pedal kit

Note
Reinforce the floor and mounting points where high loads may occur. Every installation is unique and requires proper support for safe functionality.

The post Hurricane Floor Mounted Pedal Box CNC V2 appeared first on TuunerStuudio.

Designed for the professional and semi-professional teams and drivers, which can be universally mounted for any Motorsport application.

The mix of Mild Steel Cradle and Aircraft Grade T6061 Aluminium Pedals, allows for excellent rigidity, enhanced feel and bullet proof construction.

Aircraft Grade T6061 Aluminium Pedals
Mild Steel Cradle Construction coated in a black textured finish
Multiple Pedal Pad Adjustment
Adjustable Pedal Ratio
Adjustable Clutch Stop
Oil-impregnated bronze bearing at pedal pivots
Ergonomic pedal pad adjustment for heel and toe
UK Manufactured
2 years warranty

Product Information:

Fitment: Bulkhead Fit
Pedal Ratio: 4.9:1 / 5.24:1
Weight: 0.9kg

Master brake cylinders available separately

The post OBP Floor mounted pedal box 1 pedal Pro-Race V2 appeared first on TuunerStuudio.

SILINDRID EI KUULU KOMPLEKTI

The post OBP põrandale paigaldatav pedalbox appeared first on TuunerStuudio.

SILINDER EI KUULU KOMPLEKTI

The post OBP põrandale paigaldatav (1 pedaal) appeared first on TuunerStuudio.

SILINDER EI KUULU KOMPLEKTI

The post OBP põrandale paigaldatav (2 pedaali) appeared first on TuunerStuudio.

The post OBP Racing Series Floor mounted Pedal box Black appeared first on TuunerStuudio.

SILINDRID EI KUULU KOMPLEKTI

The post OBP põrandale paigaldatav pedalbox appeared first on TuunerStuudio.

Ligikaudsed mõõtmed:

• Laius 60mm
• Pedaali kõrgus 280 mm
• Kasti sügavus 140 mm

The post OBP põrandale paigaldatav gaasipedaal appeared first on TuunerStuudio.

The post OBP põrandale paigaldatav pedalbox appeared first on TuunerStuudio.