Perfect for rally cars where a maximum of 1.5L catch tanks are allowed.

Specifications:
6x AN8 female connections
Dimensions: 132 × 132 × 98 mm

The post Catch tank 1L universal black appeared first on TuunerStuudio.

Specifications:
6x AN8 female connections
Dimensions: 132 × 132 × 150 mm

The post Catch tank 2L universal black appeared first on TuunerStuudio.

Specifications:
6x AN8 female connections
Dimensions: 132 × 132 × 208 mm

The post Catch tank 3L universal black appeared first on TuunerStuudio.

It is the same catch tank for both internal and external pumps. There are extra accessories in the internal catch tank that enable the installation of internal pumps.

The construction of the bracket for the pumps allows easy mounting of all internal pumps which are round and have a diameter of 40–60 mm, which is the market standard.

The pump mount is very stable and adjustable in height so you can easily achieve a good installation and push the pumps down to the bottom of the catch tank regardless of whether you use Walbro, AEM, Bosch, Deatschwerks pumps, etc.

This catch tank supports up to 3 pumps up to 60 mm! A catch tank that is equally suitable for those with lower power as well as those with very high power outputs.

Accessories for connecting pumps with both 8 mm and 10 mm hose are included, as well as stainless hose clamps and ethanol/gasoline resistant hose made for submersible mounting.

AN8 connections are standard on the catch tank.

Specifications:

- Updated with 3 terminal blocks, marked with + (2 pcs) and - (1 pc)
- 6 AN8 female connections at the top
- Supports 1–3 pumps up to 60 mm
- Can be converted from internal to external pump assembly
- Milled and bolted construction that will not start to leak
- Volume of approximately 3 liters depending on how many pumps are used and their size
- Dimensions 190x235 mm (diameter x height without nipples) 190x260 mm (diameter x height with nipples)

* Pumps not included.

The post SPD catch tank for in-tank fuel pumps appeared first on TuunerStuudio.

It is the same catch tank for both internal and external pumps. This model is adapted for external pumps.

This catch tank also supports up to 3 pumps! A catch tank that is equally suitable for those with lower power and for those with very high power outputs.

AN8 connections are used as standard on the catch tank.

Supplied with AN8 nipples and 3 AN8 pipe adapters. If you want to use fewer than 3 pumps, you need to buy an AN8 female or male plug.

Specifications:

- 6 AN8 female connections at the top
- Supports 1–3 pumps up to 60 mm
- Can be converted from external to internal pump assembly
- Milled and bolted construction that will not start to leak
- Volume of approximately 3.7 liters
- Dimensions 190x235 mm (diameter x height without nipples) 190x260 mm (diameter x height with nipples)
- Weight: 3.31 kg

The post SPD catch tank for external fuel pumps appeared first on TuunerStuudio.

Mounting plate, connectors and cables included. Fuel pumps are purchased separately.

Specifications:

- Supplied with 5 AN6 AN connectors
- Supports 1–2 pumps
- Volume of approx. 1.5 litres
- Dimensions 100x220 mm (diameter x height without connections) 100x250 mm (diameter x height with connections)

The post Universal catch tank for in-tank fuel pumps appeared first on TuunerStuudio.

Supports all round pumps on the market. Up to 3 pumps can be used. Adjustable height when mounting the pumps.

Bracket for pumps, PTFE hoses for 8mm and 10mm connections, and hose clamps included.

The post SPD Fuel Pump Mounting Kit for SPD Catch tank appeared first on TuunerStuudio.

For those who want to build their own tank, modify tanks for built-in fuel pumps, etc.

Technical data:
Length: 45mm
Diameter: 5mm
Mounting hole: 14mm dia.
Insertion into tank: 29mm
Protrusion from tank: 11mm
Bolt diameter: M5
Maximum diameter of spacers: 20mm
Gaskets: Viton and PTFE
Material: Stainless CNC-machined terminal block.
Max current: 60 Amps

The post Bulkhead terminal + and – appeared first on TuunerStuudio.

The sump is TIG welded and is a good complement if, for example, you want to drive with an OEM tank but with an aftermarket hose/pump or simply want to mount the fuel supply downwards in a fuel cell/self-built tank.

The sump is shaped so that as much fuel as possible can be used and so that it has the lowest point in the tank.

Specifications:
Dimensions: 225x180x75mm
Material: Steel
Connections: 2pcs AN12 ORB with seat for O-ring
TIG Welded

The post Hurricane Fuel tank sump (For Welding) appeared first on TuunerStuudio.