• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Stock MAF-sensor(if equipped) can be removed and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm (with external resistors)
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Toyota supra MKIV (2JZ) MaxxECU STREET Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan S14 SR20 (76-pin) MaxxECU RACE Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan S14A/S15 SR20 (short) MaxxECU RACE Plugin EXTRA appeared first on TuunerStuudio.

• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Stock MAF-sensor(if equipped) can be removed and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm (with external resistors)
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan S14A/S15 SR20 (short) MaxxECU STREET Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan Skyline GT-R R34 MaxxECU RACE Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan Skyline GTS/GT-R R32/33 MaxxECU RACE Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) can be removed (not used) and can be replaced with a LSU 4.2 wideband oxygen sensor (not included)
• No change in the vehicle's original system needs to be done

The post Nissan Skyline GTS/GT-R R32/33 MaxxECU RACE Plugin STANDARD appeared first on TuunerStuudio.

• The air mass meter is removed and replaced with MaxxECUs internal MAP sensor
• Controls AC, tachometer and other instrumentation in the CAN network
• Uses the car's two OEM Bosch LSU 4.2 wideband oxygen sensors.
• Control E-Throttle, EVAP and other control valves.
• ABS speeds from the CAN in MaxxECU
• PSM button for activation / deactivation of MaxxECU Traction system
• Fuel consumption does not work in the display.
• The cruise control function is not used.MaxxECU PRO is a product developed from the ground up to be flexible, reliable and fast. MaxxECU gives the user complete engine control!
  • Built-in MAP-sensor for boost pressure up to 3 bar (400Kpa)
  • Super fast and reliable USB communication between ECU and PC
  • MDash Android app over bluetooth
  • Injectors can be replaced with optional high or low impedance
  • No change in the vehicle's original system needs to be done
  • Can be upgraded with additional connectors to measure up to 12 TYPE-K sensors

The post Porsche 996 turbo 2001-2005 MaxxECU PRO Plugin STANDARD appeared first on TuunerStuudio.

• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Stock MAF-sensor(if equipped) can be removed and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm (with external resistors)
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Nissan Skyline GTS/GT-R R32/33 MaxxECU STREET Plugin EXTRA appeared first on TuunerStuudio.

• 8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness)
• Built-in 400kPa(3bar boost) MAP-sensor
• Fast and reliable USB PC-communication
• Android MDash app wireless BT-communication as dash
• Stock MAF-sensor can be removed (if exist) and replaced with MaxxECU internal MAP sensor
• Control orginal idle solenoid, AC, tachometer and other original equipment
• Fuel injectors can be replaced with optional high or low ohm
• Stock lambdasensor(s) must be removed and replaced with included LSU 4.2 wideband oxygen sensor
• No change in the vehicle's original system needs to be done

The post Toyota supra MKIV (2JZ) MaxxECU RACE Plugin EXTRA appeared first on TuunerStuudio.