Maxxecu - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/juhtajud/maxxecu/ Wed, 19 Nov 2025 12:06:43 +0000 en-US hourly 1 https://tuunerstuudio.ee/wp-content/uploads/2024/10/462539801_1749936732446472_7806435627202146352_n.png Maxxecu - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/juhtajud/maxxecu/ 32 32 MaxxECU GEN2 RACE, unit only https://tuunerstuudio.ee/en/toode/maxxecu-gen2-race-unit-only/ Wed, 19 Nov 2025 12:06:42 +0000 https://tuunerstuudio.ee/?post_type=product&p=31454 MaxxECU GEN2 RACE Technical Data

  • Superseal 1.0 connectors.

  • 550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, BSP 1/8 thread.

  • 3-axis accelerometer (up to 8 G).

  • ARM dual-core CPU.

  • Operating voltage 6–22 V.

  • 16 GB internal log capacity, 1000 Hz, all 1600+ channels.

  • USB-C 480 Mbit/s (MTune PC communication).

  • USB-C 12 Mbit/s (tablet charging).*

  • WIFI communication with MTune and MDash.*

  • Bluetooth connectivity with MDash.

  • Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN gearbox control.

  • Resolution on ignition: 0.1 degrees.

  • Resolution on injectors: 0.001 ms.

  • Performs fuel and ignition calculations 3,000 times per second.

  • 200 Hz sampling rate on all EGT inputs.

  • 2000 Hz sampling rate on analog/digital inputs.

  • Weight: 700 g.

  • Dimensions: 240x138x35 mm including protruding connectors.

  • Black powder-coated aluminum case.

  • All inputs and outputs safeguarded against overvoltage, reverse polarity, and short circuits.

*WIFI and USB Port2 not yet supported for communication – coming in 2026.

MaxxECU GEN2 RACE Inputs

  • 8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.

  • 24 Analog inputs (selectable pullups).

  • 8 Exhaust Gas Temperature inputs (TYPE-K).

  • Dual wideband lambda (LSU 5.2/4.9/4.2).

  • Dual knock sensor input.

MaxxECU GEN2 RACE Outputs

  • 16 injectors (Peak-hold high/low impedance) / GP outputs.

  • 12 IGN / GP outputs (selectable +5V/12V/GND).

  • 8 GP Outputs (GND).

  • 4 GP Outputs (+12V).

  • 4 GP Outputs (H-bridge/E-Throttle).

The post MaxxECU GEN2 RACE, unit only appeared first on TuunerStuudio.

]]> The post MaxxECU GEN2 RACE, unit only appeared first on TuunerStuudio.

]]> MaxxECU GEN2 RACE, with Dual LSU 5.2, flying lead install kit https://tuunerstuudio.ee/en/toode/maxxecu-gen2-race-with-dual-lsu-5-2-flying-lead-install-kit/ Wed, 19 Nov 2025 11:59:30 +0000 https://tuunerstuudio.ee/?post_type=product&p=31452 MaxxECU GEN2 RACE Technical Data

  • Superseal 1.0 connectors.

  • 550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, BSP 1/8 thread.

  • 3-axis accelerometer (up to 8 G).

  • ARM dual-core CPU.

  • Operating voltage 6–22 V.

  • 16 GB internal log capacity, 1000 Hz, all 1600+ channels.

  • USB-C 480 Mbit/s (MTune PC communication).

  • USB-C 12 Mbit/s (tablet charging).*

  • WIFI communication with MTune and MDash.*

  • Bluetooth connectivity with MDash.

  • Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN gearbox control.

  • Resolution on ignition: 0.1 degrees.

  • Resolution on injectors: 0.001 ms.

  • Performs fuel and ignition calculations 3,000 times per second.

  • 200 Hz sampling rate on all EGT inputs.

  • 2000 Hz sampling rate on analog/digital inputs.

  • Weight: 700 g.

  • Dimensions: 240x138x35 mm including protruding connectors.

  • Black powder-coated aluminum case.

  • All inputs and outputs safeguarded against overvoltage, reverse polarity, and short circuits.

*WIFI and USB Port2 not yet supported for communication – coming in 2026.

MaxxECU GEN2 RACE Inputs

  • 8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.

  • 24 Analog inputs (selectable pullups).

  • 8 Exhaust Gas Temperature inputs (TYPE-K).

  • Dual wideband lambda (LSU 5.2/4.9/4.2).

  • Dual knock sensor input.

MaxxECU GEN2 RACE Outputs

  • 16 injectors (Peak-hold high/low impedance) / GP outputs.

  • 12 IGN / GP outputs (selectable +5V/12V/GND).

  • 8 GP Outputs (GND).

  • 4 GP Outputs (+12V).

  • 4 GP Outputs (H-bridge/E-Throttle).

The post MaxxECU GEN2 RACE, with Dual LSU 5.2, flying lead install kit appeared first on TuunerStuudio.

]]> The post MaxxECU GEN2 RACE, with Dual LSU 5.2, flying lead install kit appeared first on TuunerStuudio.

]]> MaxxECU GEN2 RACE, with LSU 5.2, flying lead install kit https://tuunerstuudio.ee/en/toode/maxxecu-gen2-race-with-lsu-5-2-flying-lead-install-kit/ Wed, 19 Nov 2025 11:54:29 +0000 https://tuunerstuudio.ee/?post_type=product&p=31449 MaxxECU GEN2 RACE Technical Data

  • Superseal 1.0 connectors.

  • 550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, BSP 1/8 thread.

  • 3-axis accelerometer (up to 8 G).

  • ARM dual-core CPU.

  • Operating voltage 6–22 V.

  • 16 GB internal log capacity, 1000 Hz, all 1600+ channels.

  • USB-C 480 Mbit/s (MTune PC communication).

  • USB-C 12 Mbit/s (tablet charging).*

  • WIFI communication with MTune and MDash.*

  • Bluetooth connectivity with MDash.

  • Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN gearbox control.

  • Resolution on ignition: 0.1 degrees.

  • Resolution on injectors: 0.001 ms.

  • Performs fuel and ignition calculations 3,000 times per second.

  • 200 Hz sampling rate on all EGT inputs.

  • 2000 Hz sampling rate on analog/digital inputs.

  • Weight: 700 g.

  • Dimensions: 240x138x35 mm including protruding connectors.

  • Black powder-coated aluminum case.

  • All inputs and outputs safeguarded against overvoltage, reverse polarity, and short circuits.

*WIFI and USB Port2 not yet supported for communication – coming in 2026.

MaxxECU GEN2 RACE Inputs

  • 8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.

  • 24 Analog inputs (selectable pullups).

  • 8 Exhaust Gas Temperature inputs (TYPE-K).

  • Dual wideband lambda (LSU 5.2/4.9/4.2).

  • Dual knock sensor input.

MaxxECU GEN2 RACE Outputs

  • 16 injectors (Peak-hold high/low impedance) / GP outputs.

  • 12 IGN / GP outputs (selectable +5V/12V/GND).

  • 8 GP Outputs (GND).

  • 4 GP Outputs (+12V).

  • 4 GP Outputs (H-bridge/E-Throttle).

The post MaxxECU GEN2 RACE, with LSU 5.2, flying lead install kit appeared first on TuunerStuudio.

]]> The post MaxxECU GEN2 RACE, with LSU 5.2, flying lead install kit appeared first on TuunerStuudio.

]]> MaxxECU GEN2 RACE, with connector kit https://tuunerstuudio.ee/en/toode/maxxecu-gen2-race-koos-pistikukomplektiga/ Wed, 19 Nov 2025 11:46:48 +0000 https://tuunerstuudio.ee/?post_type=product&p=31445 MaxxECU GEN2 RACE technical

  • Superseal 1.0 connectors.
  • 550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, with BSP 1/8 thread.
  • 3-axis accelerometer (up to 8 G).
  • ARM dual core CPU.
  • 6-22V operating voltage.
  • 16GB internal log capacity, 1000Hz, all 1600+ channels.
  • USB-C 480mbit/s (MTune PC communication).
  • USB-C 12mbit/s (tablet charging).*
  • WIFI communication with MTune and MDash.*
  • Bluetooth connectivity with MDash.
  • Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN gearbox control.
  • Resolution on ignition: 0.1 degrees.
  • Resolution on injectors: 0.001 ms.
  • Performs fuel and ignition calculations 3,000 times per second.
  • 200Hz sampling rate on all EGT inputs.
  • 2000Hz sampling rate on analog/digital inputs.
  • Weight: 700g.
  • 240x138x35mm including protruding connectors.
  • Black powder-coated aluminium case.
  • All inputs and outputs are safeguarded against overvoltage, reverse polarity, and short circuits.

*WIFI and USB Port2 not yet supported for communication - coming in 2026. 

MaxxECU GEN2 RACE inputs

  • 8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.
  • 24 Analog inputs (selectable pullups).
  • 8 Exhaust Gas Temperature inputs (TYPE-K).
  • Dual wideband lambda (LSU 5.2/4.9/4.2).
  • Dual knock sensor input.

 MaxxECU GEN2 RACE outputs

  • 16 injectors (Peak-hold high/low impedance) / GP outputs.
  • 12 IGN / GP outputs (selectable +5V/12V/GND).
  • 8 GP Outputs (GND).
  • 4 GP Outputs (+12V).
  • 4 GP Outputs (H-bridge/E-Throttle).

The post MaxxECU GEN2 RACE, with connector kit appeared first on TuunerStuudio.

]]> The post MaxxECU GEN2 RACE, with connector kit appeared first on TuunerStuudio.

]]> MaxxECU MINI unit with threaded MAP connection (without internal CAN resistor) https://tuunerstuudio.ee/en/toode/maxxecu-mini-unit-with-threaded-map-connection-without-internal-can-resistor/ Fri, 21 Feb 2025 09:03:00 +0000 https://tuunerstuudio.ee/?post_type=product&p=26057 Special edition of the MaxxECU MINI, which has a M5 threaded MAPsensor connection.
Without internal CAN termination resistor.

The post MaxxECU MINI unit with threaded MAP connection (without internal CAN resistor) appeared first on TuunerStuudio.

]]> The post MaxxECU MINI unit with threaded MAP connection (without internal CAN resistor) appeared first on TuunerStuudio.

]]> MaxxECU MINI unit with threaded MAP connection https://tuunerstuudio.ee/en/toode/maxxecu-mini-unit-with-threaded-map-connection/ Fri, 21 Feb 2025 09:00:37 +0000 https://tuunerstuudio.ee/?post_type=product&p=26027 Special edition of the MaxxECU MINI, which has a M5 threaded MAPsensor connection.

  • 4 injector (high impedance only) and 4 ignition outputs
  • 4 ignition outputs (no internal amplifiers).
  • IAT, TPS, CLT analog inputs.
  • Built-in 400kPa MAP-sensor.
  • 2 extra 0-5V analog inputs.
  • 2 extra digital inputs.
  • 4 extra GPO (GND) outputs.
  • CAN.
  • 1 trigger input (VR/Hall). Available digital input can be used as HOME for sequential control).
  • MTune PC-software with USB connection.
  • Superfast Cortex M3 120Mhz main processor.

The post MaxxECU MINI unit with threaded MAP connection appeared first on TuunerStuudio.

]]> The post MaxxECU MINI unit with threaded MAP connection appeared first on TuunerStuudio.

]]> MaxxECU MINI unit (without internal CAN resistor) https://tuunerstuudio.ee/en/toode/maxxecu-mini-unit-without-internal-can-resistor/ Fri, 21 Feb 2025 08:33:50 +0000 https://tuunerstuudio.ee/?post_type=product&p=26020 Without internal CAN termination resistor.

  • 4 injector (high impedance only) and 4 ignition outputs
  • 4 ignition outputs (no internal amplifiers).
  • IAT, TPS, CLT analog inputs.
  • Built-in 400kPa MAP-sensor.
  • 2 extra 0-5V analog inputs.
  • 2 extra digital inputs.
  • 4 extra GPO (GND) outputs.
  • CAN.
  • 1 trigger input (VR/Hall). Available digital input can be used as HOME for sequential control).
  • MTune PC-software with USB connection.
  • Superfast Cortex M3 120Mhz main processor.

The post MaxxECU MINI unit (without internal CAN resistor) appeared first on TuunerStuudio.

]]> The post MaxxECU MINI unit (without internal CAN resistor) appeared first on TuunerStuudio.

]]> MaxxECU MINI board with connector https://tuunerstuudio.ee/en/toode/maxxecu-mini-board-with-connector/ Thu, 20 Feb 2025 08:21:06 +0000 https://tuunerstuudio.ee/?post_type=product&p=25863 NOTE: Only for advanced users and this product has no guarantee as the board has no cover.

MAP sensor hose and clamp are included. Board is 65x70mm.

The post MaxxECU MINI board with connector appeared first on TuunerStuudio.

]]> The post MaxxECU MINI board with connector appeared first on TuunerStuudio.

]]> MaxxECU MINI board https://tuunerstuudio.ee/en/toode/maxxecu-mini-board/ Thu, 20 Feb 2025 08:13:59 +0000 https://tuunerstuudio.ee/?post_type=product&p=25861 NOTE: Only for advanced users and this product has no guarantee as soldering takes place outside our control.

MAP sensor hose and clamp is included. Board is 65x70mm.

  • 4 injector (high impedance only) and 4 ignition outputs
  • 4 ignition outputs (no internal amplifiers).
  • IAT, TPS, CLT analog inputs.
  • Built-in 400kPa MAP-sensor.
  • 2 extra 0-5V analog inputs.
  • 2 extra digital inputs.
  • 4 extra GPO (GND) outputs.
  • CAN.
  • 1 trigger input (VR/Hall). Available digital input can be used as HOME for sequential control).
  • MTune PC-software with USB connection.
  • Superfast Cortex M3 120Mhz main processor.

The post MaxxECU MINI board appeared first on TuunerStuudio.

]]> The post MaxxECU MINI board appeared first on TuunerStuudio.

]]> MaxxECU Sport engine control unit https://tuunerstuudio.ee/en/toode/maxxecu-sport-juhtaju/ Thu, 20 Feb 2025 07:55:22 +0000 https://tuunerstuudio.ee/?post_type=product&p=25859
  • Controls up to 6 cylinders sequentially (12 in wasted spark).
  • Built-in 400kPa MAP-sensor.
  • Wideband lambda directly into MaxxECU without external electronics.
  • Fast and reliable USB PC-communication.
    • Bluetooth
    • 2 trigger inputs.
    • IAT, TPS, CLT analog inputs.
    • Built-in wideband (LSU 4.2 or 4.9).
    • Built-in 400kPa MAP-sensor.
    • E-Throttle support.
    • 2 extra analog temperature inputs.
    • 2 extra digital inputs.
    • 6 injector outputs (high/low impedance).
    • 6 ignition outputs (no internal amplifiers).
    • 7 extra flexible outputs (GPO).
    • 2 extra motor outputs. GPO 10-11 (2A)
    • CAN bus
    • Aluminium case
    • MTune PC-software with USB connection.
    • Superfast Cortex M3 120Mhz main processor.

    The post MaxxECU Sport engine control unit appeared first on TuunerStuudio.

    ]]>     The post MaxxECU Sport engine control unit appeared first on TuunerStuudio.

    ]]>