ECUs - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/juhtajud/ Fri, 08 May 2026 06:52:23 +0000 en-US hourly 1 https://tuunerstuudio.ee/wp-content/uploads/2024/10/462539801_1749936732446472_7806435627202146352_n.png ECUs - TuunerStuudio https://tuunerstuudio.ee/en/tootekategooria/juhtajud/ 32 32 ECU Master Rotary switch https://tuunerstuudio.ee/en/toode/ecu-master-poordluliti/ Fri, 08 May 2026 06:52:23 +0000 https://tuunerstuudio.ee/?post_type=product&p=35212 The 8-step ECU Master Rotary switch can be used to control various ECU functions such as Traction Control and Boost Control settings.
Installation is simple: connect 5V power, sensor ground, and output signal. The rotary switches can be connected to any available analog input on the EMU, EMU Black, or PMU16.

Dimensions:

Mounting hole size: 8.8 mm to 9 mm (8.8 mm thread outer diameter)
Position pins for fixed mounting position: 3 mm (W) x 0.60 mm (Thickness)
Distance from mounting hole center to position pin: ~8 mm
Board size: 22.75 mm x 21.15 mm
Depth from mounting surface to back of the board: 12 mm (including space for solder pins)
Knob: 16 mm (L) x 15 mm (Outer diameter)
Total height from solder pins on the back of the board to the top of the knob: ~32 mm

The post ECU Master Rotary switch appeared first on TuunerStuudio.

]]> The post ECU Master Rotary switch appeared first on TuunerStuudio.

]]> Repair (work unit) https://tuunerstuudio.ee/en/toode/remont-toouhik/ Sat, 03 Jan 2026 11:33:05 +0000 https://tuunerstuudio.ee/?post_type=product&p=31868 Order only after consultation!
for control units that have been sent in for inspection and repair.

The post Repair (work unit) appeared first on TuunerStuudio.

]]> The post Repair (work unit) appeared first on TuunerStuudio.

]]> NoKnock PNP https://tuunerstuudio.ee/en/toode/noknock-pnp/ Sat, 03 Jan 2026 11:31:08 +0000 https://tuunerstuudio.ee/?post_type=product&p=31866 Adaptiv module for knock detection with standard knocksensors 

- direct plug in on all kdFi V1.4 PNP with 4 pin external connector
- Signal usable in Tunerstudio at input AD7 / JS4
- additional open collector output e.g. for signal light for the driver (white cable)

The post NoKnock PNP appeared first on TuunerStuudio.

]]> The post NoKnock PNP appeared first on TuunerStuudio.

]]> Lambdasensor Connector https://tuunerstuudio.ee/en/toode/lambda-anduri-pistik/ Sat, 03 Jan 2026 11:29:11 +0000 https://tuunerstuudio.ee/?post_type=product&p=31862 Prepared connection cable for the Lambdasonde LSU 4.2,
ready to plug in for the PNP Engine Control Units

The post Lambdasensor Connector appeared first on TuunerStuudio.

]]> The post Lambdasensor Connector appeared first on TuunerStuudio.

]]> Lambda Sensor LSU 4.2 https://tuunerstuudio.ee/en/toode/lambda-sensor-lsu-4-2/ Sat, 03 Jan 2026 11:25:12 +0000 https://tuunerstuudio.ee/?post_type=product&p=31860 Wideband Lambda Sensor LSU 4.2
- used with integrated kdFi V1.4 Lambdacontroller

The post Lambda Sensor LSU 4.2 appeared first on TuunerStuudio.

]]> The post Lambda Sensor LSU 4.2 appeared first on TuunerStuudio.

]]> Boost sensor 3 bar for kdFi https://tuunerstuudio.ee/en/toode/3-baarine-ulerohuandur-kdfi-jaoks/ Sat, 03 Jan 2026 11:22:16 +0000 https://tuunerstuudio.ee/?post_type=product&p=31858 Absolute pressure sensor up to 3-bar boost (4-bar absolute)
Can be used as an alternative for high boost engines
Sensor curve: MPXH6400
Only useful for kdFi, a 3-bar sensor is already integrated in the UAB

The post Boost sensor 3 bar for kdFi appeared first on TuunerStuudio.

]]> The post Boost sensor 3 bar for kdFi appeared first on TuunerStuudio.

]]> Barometric sensor https://tuunerstuudio.ee/en/toode/baromeetriline-andur/ Sat, 03 Jan 2026 11:20:18 +0000 https://tuunerstuudio.ee/?post_type=product&p=31856 Barometric sensor for permanent altitude correction

The post Barometric sensor appeared first on TuunerStuudio.

]]> The post Barometric sensor appeared first on TuunerStuudio.

]]> Plug set PNP https://tuunerstuudio.ee/en/toode/pnp-pistikukomplekt/ Sat, 03 Jan 2026 11:17:52 +0000 https://tuunerstuudio.ee/?post_type=product&p=31854 Plug set for kdFi V1.4 PNP and UAB engine control units

The post Plug set PNP appeared first on TuunerStuudio.

]]> The post Plug set PNP appeared first on TuunerStuudio.

]]> kdFi V1.4 plug set Cinch https://tuunerstuudio.ee/en/toode/kdfi-v1-4-pistikukomplekt-cinch/ Sat, 03 Jan 2026 11:15:54 +0000 https://tuunerstuudio.ee/?post_type=product&p=31852 Plug Set for kdFi V1.4 with housing

The post kdFi V1.4 plug set Cinch appeared first on TuunerStuudio.

]]> The post kdFi V1.4 plug set Cinch appeared first on TuunerStuudio.

]]> Replacement board kdFi V1.4 PNP BMW M44 https://tuunerstuudio.ee/en/toode/asendusplaat-kdfi-v1-4-pnp-bmw-m44/ Sat, 03 Jan 2026 11:11:03 +0000 https://tuunerstuudio.ee/?post_type=product&p=31850 Order only after consultation!

The post Replacement board kdFi V1.4 PNP BMW M44 appeared first on TuunerStuudio.

]]> The post Replacement board kdFi V1.4 PNP BMW M44 appeared first on TuunerStuudio.

]]>