feed -> fuel filter -> Fuelrail -> Fuel pressure regulator -> return

Components:
1x AN6 180 degree AN fitting PTFE
5x AN6 straight AN fitting PTFE
10 meters AN6 Nylon-wrapped AN hose PTFE

Against the fuel tank's supply and return, use suitable couplings that come from the fuel pump hanger.

NOTE: If you have more than about 700hp in the future, choose AN8 parts instead.

The post SPD Hose Kit AN6 Nylon PTFE E85 / Gasoline appeared first on TuunerStuudio.

feed -> fuel filter -> Fuelrail -> Fuel pressure regulator -> return

Components:
1x AN8 180 degree AN fitting PTFE
5x AN8 straight AN fitting PTFE
10 meters AN8 Nylon-wrapped AN hose PTFE

Against the fuel tank's supply and return, use suitable couplings that come from the fuel pump hanger.

NOTE: If you have more than about 1000hp in the future, choose AN10 parts instead.

The post SPD Hose Kit AN8 Nylon PTFE E85 / Gasoline appeared first on TuunerStuudio.

Connection
Engine -> Hose Kit -> oil catch tank

Adapter 1 - motor
In addition to this hose package, you need an AN10 adapter to connect to the engine

Adapter 2 - oil catch tank
You must have an oil catch tank with AN10 connection or an AN10 male adapter on your oil catch tank.

Variants
If you want to connect to two points on the engine, e.g. valve cover and engine block, you need 2 of this kit and a catch tank with two inlets or two oil catch tanks with one inlet.

Components
2x AN10 90 degree AN fitting
1 meter AN10 Nylon Wrapped AN Hose

The post SPD AN10 Hose Kit Crankcase Ventilation (1 meter) appeared first on TuunerStuudio.

4x AN Connectors
3 Meter Hose
AN8 = ID: 11mm

Use the same inner diameter as for the original oil cooler.

Start from AN8 (ID: 11mm) if the oil cooler was not fitted originally.

The post SPD Hose Kit Oil Cooler AN8 – 3 meters appeared first on TuunerStuudio.

4x AN Connectors
3 Meter Hose
AN10 = ID: 14mm

Use the same inner diameter as for the original oil cooler.

Start from AN8 (ID: 11mm) if the oil cooler was not fitted originally.

The post SPD Hose Kit Oil Cooler AN10 – 3 meters appeared first on TuunerStuudio.

feed -> fuel filter -> Fuelrail -> Fuel pressure regulator -> return

Components:
1x AN8 180 degree AN fitting PTFE
5x AN8 straight AN fitting PTFE
10 meters AN8 Steel AN hose PTFE

Against the fuel tank's supply and return, use suitable couplings that come from the fuel pump hanger.

NOTE: If you have more than about 1000hp in the future, choose AN10 parts instead.

The post SPD Hose Kit AN8 Steel PTFE E85 / Gasoline appeared first on TuunerStuudio.

feed -> fuel filter -> Fuelrail -> Fuel pressure regulator -> return

Components:
1x AN6 180 degree AN fitting PTFE
5x AN6 straight AN fitting PTFE
10 meters AN6 Steel-wrapped AN hose PTFE

Against the fuel tank's supply and return, use suitable couplings that come from the fuel pump hanger.

NOTE: If you have more than about 700hp in the future, choose AN8 parts instead.

The post SPD Hose Kit AN6 Steel PTFE E85 / Gasoline appeared first on TuunerStuudio.