SPD catch tank for external fuel pumps

SPD high-end catch tank that has milled parts out of one piece. The entire construction is bolted with Viton O-rings for maximum operational reliability for both gasoline and ethanol. The tank has no welds that can crack and start leaking.

It is the same catch tank for both internal and external pumps. This model is adapted for external pumps.

This catch tank also supports up to 3 pumps! A catch tank that is equally suitable for those with lower power and for those with very high power outputs.

AN8 connections are used as standard on the catch tank.

Supplied with AN8 nipples and 3 AN8 pipe adapters. If you want to use fewer than 3 pumps, you need to buy an AN8 female or male plug.

Specifications:

– 6 AN8 female connections at the top
– Supports 1–3 pumps up to 60 mm
– Can be converted from external to internal pump assembly
– Milled and bolted construction that will not start to leak
– Volume of approximately 3.7 liters
– Dimensions 190×235 mm (diameter x height without nipples) 190×260 mm (diameter x height with nipples)
– Weight: 3.31 kg